Голосовой пульт с гироскопом для медиаплееров Смарт ТВ Приставок * G10S PRO BT * Голосовое управление * С гироскопом * Air Mouse * для Смарт ТВ боксов * Android * Аэромышь * USB * 2.4ГГц + Bluetooth * С микрофоном * Воздушная мышь * Программируемые кнопки
Гарантия возврата денег, если товар не подойдёт
Описание
Voice Remote with Gyroscope for Smart TV Boxes * G10S PRO BT * Voice Control * With Gyroscope * Air Mouse * for Smart TV Boxes * Android * Air Mouse * USB * 2.4GHz + Bluetooth * With Microphone * Air Mouse * IR Programmable POWER MUTE Buttons Very easy USB connection! Just plug in a 2.4GHz mini USB receiver into a free USB port, install 2 AAA batteries into the remote control, press the buttons and the remote control will work! To connect via Bluetooth, you need to disconnect the USB receiver from the set-top box (PC, TV, etc.) and look at the instructions. To switch to airmouse mode, you need to press the arrow button on the remote control (top right). * It is possible in the settings to set the mouse cursor speed that is convenient for you. The “POWER” button and the “MUTE” mute button allow you to copy (record, teach) IR signal from the remote control of your TV - turn on TV, sound and control the set-top box from one remote control! * When programming the remote, the receiver must be removed from the set-top box. Suitable for almost any Android Smart TV box! For X96 Max, X96 Max Plus, X96 Mini, A95X F3 Air, Tox1, Vontar X3 and many more! How to set up and use : All air mice use a USB port to communicate with the Android box, which turns off power when turned off. Naturally, the USB adapter is inactive and the air mouse does not work. You can turn off the working prefix with an air mouse, but turn it on no longer. For this purpose, the ability to program the power button has been integrated into the G10S PRO BT, which works via an infrared signal that is active on the set-top box and in the off state. To program the key, place two remote controls opposite each other. Press the ON button on the G10S PRO BT until the LED starts blinking. After that, press the ON button on the bundled remote control. Wait until the LED on the G10S PRO BT stops flashing and check the programming for operability. If the first time it didn’t work out — repeat all the steps again. Mouse speed level adjustment :1. Increase Mouse Speed : Press "OK" and "Volume +" at the same time.2. Decrease mouse speed : Press "OK" and "Volume -" at the same time. Voice Control: Press and hold \"Voice Dial\" to turn on the voice channel. Release the button to turn off the voice channel. Sensor Calibration Voltage or temperature changes can cause the cursor to move. In this case, place the airmouse on a table and leave it in place. You can end calibration by pressing any button to turn it on when it is in hyperbinding mode. For initial use, plug the USB adapter into the device's USB port and wait 20-60 seconds for the USB adapter driver to install. Move the air mouse, the remote cursor should move across the screen, which will mean that the pairing was successful. If this fails, press and hold the "OK" and "Home" buttons, the LED indicator will start flashing. Pairing is successful when the LED stops flashing.Reminder
Свойства товара
- Голосовой помощник: Google Assistant
- Встроенная память, ГБ: 7
- Пульт ДУ в комплекте: Да
- Размеры, мм: 143*29*45
- Вес товара, г: 50
- Гарантийный срок : Гарантия 1 месяц
- Тип: Медиаплеер
- Операционная система: Android
- Беспроводные интерфейсы : Bluetooth, ИК-порт
- Цвет: Темно-синий