Угломер электронный MINI DIGITAL с магнитным основанием
Гарантия возврата денег, если товар не подойдёт
Описание
Mini Digital protractor is an electronic protractor with a perfectly flat, metal base and measurement accuracy up to hundredths of a degree. Suitable for measuring the angle of sharpening on sharpeners of all kinds and types. 2 AAA batteries are used as power supply, which ensures a longer operation time. Characteristics: Dimensions: 57 × 55 × 25 mm; Angle measurement range: 360 ° (4 x 90 °); Measurement step: 0.05 °; Measurement accuracy: +/- 0.2°;Measurement value: up to hundredths;Automatic shutdown after: 3 min;LCD backlight: no;Magnetic fastening: base;Battery: 2 x AAA (included);Case material: black plastic Storage case: no; “absolute” angle measurement mode; HOLD – indicates that the last readings of the goniometer are fixed; ᵒ – indicates that the goniometer is working in the angle measurement mode in degrees; % – indicates that the goniometer is working in the angle measurement mode in percent;▀ – lights up or flashes when the batteries are discharged; Erro (Err) - warning about deviation from the vertical axis. BUTTON FUNCTIONSON / OFF - turn on / off the device; Tilt% / Hold - switch the measurement mode in percent and degrees / fix readings; ZERO - switch the measurement mode “relative” ANGLE GAUGE ON/OFF Press the ON/OFF button once to turn on the device. To turn off the device, press the ON/OFF button again. If there is no movement or pressing any button for 3 minutes, the device will automatically turn off. To turn on the device, press the ON/OFF button once. ANGLE MEASUREMENTAbsolute zero - when the device is turned on, the goniometer is immediately ready to measure the “absolute” angle. The “LEVEL” indicator lights up on the displays. The measurement is based on factory settings. Relative zero is a temporary calibration of the protractor to measure the angle (difference) between two planes, while they do not lie in the horizontal plane (absolute zero). device, press the ZERO button to set the display to zero and enter the relative angle measurement mode. In the relative measurement mode, the “LEVEL” symbol on the LCD will disappear; To return to the “LEVEL” absolute measurement mode, turn the protractor off and on. when pressed, the measuring mode is switched to “ᵒ“. GONITOR CALIBRATION* The digital instrument has been pre-calibrated at the factory, the product should only be recalibrated if it has been reset. Place the goniometer on a flat and smooth surface. The surface must be set to "0" according to the reference protractor. Press the "ON / OFF" button and the "ZERO" button at the same time, set
Свойства товара
- Вид измерительного инструмента: Электронный
- Артикул: 5364
- Тип: Угломер
- Материал: Пластик
- Страна-изготовитель: Китай