SW7 High-precise Through-coating Ultrasonic Thickness Gauge
Гарантия возврата денег, если товар не подойдёт
Описание
SW7 High-precise Through-coating Ultrasonic Thickness GaugeProduct Description
SW7 is a high-precision ultrasonic thickness gauge independently developed by Qingcheng AE Institute, which can be used to measure thickness through the coating on the workpiece surface. It is suitable for various materials through-coating high-precision measurement needs, can be applied to steel, cast iron, aluminum, copper, zinc, quartz, glass, polyethylene, PVC, gray cast iron, ductile cast iron and other materials of the measured object thickness measurement.The thickness of the workpiece can be measured quickly and accurately only by placing the probe on the contact surface on one side of the workpiece. And it is convenient to measure the workpiece coated with paint or anticorrosive material.
Main Features:lSW7 can be used to measure thickness through the coating on the workpiece surface, through the coating range extended to more than 50 mm; It is suitable for thickness measurement of almost all materials, such as metal, glass, plastic, rubber, and other materials.
lHigh measuring accuracy, large measuring range; Suitable for pipe thickness measurement.
lA variety of probes are available, suitable for special thickness measurement applications, including coarse grain materials such as gray cast iron and high temperature environment measurement (temperature up to 300℃) applications.
lProbe self-adaptive functions: automatic matching different manufacturers of various types of probes, including identifying the sensitivity and frequency of probe, automatic adjusting the thickness gauge parameter Settings, to reach the best measuring effect.
lPower-on self-check function, which help to improve the measurement accuracy.
lAutomatic shutdown time can be set up according to user's needs.
lProbe zero automatic calibration, sound velocity calibration function.
lBuilt-in 9 kinds of materials of sound velocity, and convenient to fast measurement.
lVarious measurement modes: standard measurement mode, though-coating mode, scanning mode, differential measurement mode, the average measurement mode, extremum alarm mode, high temperature measurement model (with high temperature probe).
lHumanized design of keyboard button, simple and convenient: zero calibration, single point and two points calibration sound velocity.
lHigh-capacity data storage, data storage capacity of up to 2000 groups.
lUSB data transmission interface, easy implementation and computer data connected to export data (data format. TXT).
lMetric/inch optional: display unit can choose between mm and inches.Thickness measuring range:
l0.65~500mm (Steel)
l0.3~200mm (Glass)
l3~50mm (Cast iron)
l4~80mm (High temperature)
lPenetrate coating range:3mm~50mm
Note: The thickness measurement range for different materials depends on the performance of the probe as well as the material surface condition and the ambient temperature measured.Optional probe:Probe typeSpecificationMeasuring rangeDiameterFrequencyTemperatureStandard type
(suitable for coating workpiece)5M,D100.7~400mm 3.0~50mm (coating)10mm5MHz-10~+50℃Small-diameter type5M,D60.70~60mm6mm5MHz-10~+50℃Standard type2.5M,D123.0~500mm12mm2.5MHz-10~+50℃Micro-diameter type7.5M,D60.65~25mm6mm7.5MHz-10~+50℃High precision type7.5M,D100.65~250mm10mm7.5MHz-10~+50℃High temperature typeZW5P4.0~80mm12mm5MHz-10~+300℃Special cast iron type2M,D223.0~50mm(cast iron)22mm2MHz-10~+50℃Applicable conditionlThe surface of the measured workpiece should be clean. If it is rough or seriously corroded, coupling agent should be used on the surface, or treat the surface of the measured workpiece with rust remover, wire brush or sandpaper.
lIf the workpiece surface is coated with paint or anticorrosive materials, it can be measured directly without treatment.
lEnsure that the surrounding environment has no strong vibration, no strong magnetic field, no corrosive media, and serious dust.
lThe probe should be selected according to the thickness and shape of the measured workpiece.
lWhen measuring at ambient temperature, the surface of the measured object should not exceed 50°C, otherwise it will damage the probe. If the probe is worn, the measurement value will be unstable. At this time, the probe should be replaced.Company InformationPackaging & ShippingFAQ1.What is the price term?FOB Guangzhou.
2.What’s the warranty time?12 months after shipment date
3.What’s the delivery date?30-45 days after receiving the T/T payment.
4.How to deal with the faulty part if exceeds the warranty time?Customer can return the faulty parts for our testing and maintaining, all the logistic cost and maintaining fee should be at customer’s cost.
Свойства товара
- Warranty: 1 year
- Customized support: OEM, ODM
- Place of Origin: Guangdong, China
- Brand Name: QingCheng AE
- Model Number: SW7
- Measurement Range: 0.65mm~500mm (steel)
- Working temperature: -10~+50°C
- Display accuracy: 0.01mm/0.001inch
- Material sound velocity: 509m/s~18699m/s settable
- Measurement accuracy: ±(0.5%H+0.05) mm
- Receive bandwidth: 1MHz~10MHz(-3dB)
- Measurement frequency: 2~20 times/s settable
- Power supply: 3VDC(two pieces of AA alkaline batteries)
- Working time: 280 hours(Backlight off)100 hours(Backlight on)
- Dimension: 136(L) mm*72(W) mm*20(H)mm