Пульт XT 4 SLH 868 Мгц для ворот, шлагбаума автоматики FAAC
Гарантия возврата денег, если товар не подойдёт
Описание
Remote control XT4 SLH white with a frequency of 868 MHz to control gates, automatic barriers from FAAC or any other manufacturer when an external FAAC receiver is connected. Dual channel remote control (XT4) allows you to control two devices. They have the function of copying the code from the remote control to the remote control next to the automation - to add new remote controls to the system, there is no need to access the receiver. Each button of the remotes can be programmed. Faac XT4 SLH remotes operate in two modes: Master and Slave. The master console can be used to write its code to the radio receiver (minidec) of the control unit, as well as to transfer its code to other Master consoles or Slave consoles. In addition, in the Master console it is possible to replace your own code with a new one (it is generated automatically by the console). The slave remote control, unlike the master remote control, cannot be used to program other remote controls, to write its code to the radio receiver (minidec) of the control unit, and its code cannot be changed without using the master remote control. We suggest that you familiarize yourself with the main nuances of programming FAAC remotes, which allow you to successfully carry out this procedure. RC coding remotes ( 787452 / 787454): When recording remotes into the radio receiver, the minimum distance between the remote control and the receiver should be 30-50 cm; Recording from the remote control to the remote control is possible only within the range of the radio receiver; These remote controls do not have the MASTER-SLAVE function; Recording prohibition from the remote control to the remote control is possible only when cutting the LK1 jumper on the radio receiver board. SLH encoding remotes (787007/71, 787008/81, 787009/91, 787010/101): Only 1 remote control is recorded in the receiver, all the rest must be recorded from remote control to remote control; and any console that is not forcibly converted into a slave i.e. one radio receiver can have up to 250 master remotes; with this recording, the radio code memory cell is “clogged” in the receiver; You can determine the operating frequency of the SLH encoding consoles by the color of the rim of the control buttons BLACK / WHITE - 868 MHz, GRAY - 433 MHz; How to determine the Master and Slave remote control, how to transfer the Master remote control code to other remote controls .Feature of remote control programming to external receiver 787747/787749 (appears approximately on every 3-4 receivers): - before adding remote controls to the radio receiver's memory, it is necessary to perform the memory clearing procedure. Programming FAAC remotes. Operating frequency 868.35MHz ±200KHz. Power supply 2 CR2032 3V lithium batteries. Your remote control supports MASTER/SLAVE modes. light. The master console can be used to write its own code to the radio receiver (minidec) of the control unit, as well as to transfer all the code to other master or slave c
Свойства товара
- Для управления: дверьми, воротами
- Индикация: Светодиодная
- Цвет: Белый
- Тип: Пульт для шлагбаумов и ворот
- Питание от: батареек