Пульт дистанционного управления ( радиоуправления ) 433 МГц 2-х клавишный. Для ворот, шлагбаума, радиоуправляемых реле.
Гарантия возврата денег, если товар не подойдёт
Описание
Remote control, operates at a frequency of 433 MHz. It has 2 keys, which allows you to control two devices or different channels of one device. The main purpose of this remote control is to control a remote relay, which does not interfere with its use with other devices. This remote control does not have a clone (duplicate) function. For it to work with your device, you must first register (configure) to your device (relay, controller, etc.) according to the instructions for your device. Let's analyze the method of connecting the remote control using the example of a single-channel remote relay EstarDyn:0. To clear the relay memory, press and hold the service button on the relay board for 8 seconds, the LED also located on the board will flash, the relay memory is cleared.1. The first mode, work without fixation. Press the button on the receiver once, the LED will light up, then press the A or B button on the remote control, the LED will blink, this will mean that while the button you selected is pressed, the relay will be closed.2. The second mode, work with fixation with one button. Press the button on the receiver twice, the diode will light up, then press the button A or B on the remote control, the LED will blink, this will mean that after pressing the selected button once, the relay will turn on and off only after pressing the same button once.3. The third mode, work with turning on one button and turning off the other. Press the button on the receiver three times, the LED will light up, then press the A button on the remote control, the LED will blink and light up, then press the B button, after which the LED will blink and go out, this will mean that when you press the A button, the relay will turn on and off only at the push of a button.4. The fourth mode, work with a delay of switching off for 5 seconds. Press the button on the receiver four times, the LED will light up, then press the A or B button on the remote control, the LED will blink, this will mean that when you press the selected button once, the relay will turn on and turn off after 5 seconds.5. Fifth mode, operation with a 10 second shutdown delay. Press the button on the receiver five times, the LED will light up, then press the A or B button on the remote control, the LED will blink, this will mean that when you press the selected button once, the relay will turn on and turn off after 10 seconds.6. The sixth mode, work with a shutdown delay of 15 seconds. Press the button on the receiver six times, the LED will light up, then press the A or B button on the remote control, the LED will blink, this will mean that when you press the selected button once, the relay will turn on and turn off after 15 seconds. You can similarly bind several remote controls to one relay, or bind different devices or functions to different keys of one remote control. Specifications: Operating frequency: 433 MHz. Operating voltage: DC 6V. Operating current: 12 mA. Transmission power: 10 mW.
Свойства товара
- Страна-изготовитель: Китай
- Тип: Пульт для шлагбаумов и ворот
- Количество в упаковке, шт: 1
- Цвет: Черный, хром