Экстендер для увеличения члена США максимальный комплект
Гарантия возврата денег, если товар не подойдёт
Описание
Instructions for using the Extender Bigpenis❤️STEP 1☝️Set the starting length of the extender rods. Changing the length of the rods is done by winding or replacing rods of different lengths. To do this, the BigPenis extender comes with rods 5, 2.5 and 1.5 cm long. The approximate starting length of the rods is equal to the length of the erect penis minus 4 cm apparatus will be 11 cm). The starting length of the rods should allow you to put on the extender and fix it on the penis. The exact starting length of the rods is calculated experimentally. STEP 2☝️ Put on the BigPenis Extender so that the stop ring is located around the base of the penis. The semi-circular recess in the thrust ring should be from below. STEP 3☝️Pull the foreskin towards the pubis, straighten all skin folds. Apply softening material to the shaft of the penis, the coronal sulcus and the edge of the glans. Use the softening foam cushion included with the BIGPENIS Extender STEP 4☝️Press the Head Retainer Platform to shorten the overall length of the Extender and place the Retainer Strap over the cushioning bandage. To apply the strap, insert both ends of the strap into the appropriate holes on the platform and tighten gently. Fixation should not be too strong and pinch the head. At the same time, the degree of fixation should not allow the head of the penis to slip. STEP ☝️5 Adjust the tension with the screw mechanism. Turn both screws at the same time to achieve even tension on both sides of the extender. Control the amount of tension along the notches on the spring balance - as the tension increases, one part of the spring balance will go inside the other, closing the notches. 4 notches mean tension values of 600, 900, 1200 and 1500 g. In the first two weeks, the tension is set at 600 g, it is not recommended to exceed this level, since this will not cause a positive effect, but on the contrary, it can cause overtraining of tissues and stop them growth. If the length of the screw mechanism is not enough to create the required tension, it is necessary to screw additional rods onto the rods and adjust the tension with the screws. If, on the contrary, the tension created by the extender is excessive even without unscrewing the screw mechanism, it is necessary to remove one of the rods and again adjust the tension using the screw mechanism. ). The determining factor will be the total wearing time per day. Take breaks from wearing the extender every 60-90 minutes, remove the extender and massage the penis for 5-15 minutes or more, if necessary, to stimulate circulation.STEP 7 efforts in 900-1000 g. - such an effort is sufficient for tissue growth. It is not recommended to exceed the tension force of 1200. STEP 8 ☝️ You can wear an extender
Свойства товара
- Страна-изготовитель: США
- Тип: Экстендер
- Вибрация: Без вибрации
- Вес товара, г: 250
- Цвет: Белый