Laser Perforating Machine with Auxiliary Pressure Roller
Гарантия возврата денег, если товар не подойдёт
Описание
Laser perforating machine with a PLC, touch screenAuxiliary pressure roller It's mainly used to adjust the pressure in the cylinder of auxiliary pressure roller mechanism. Generally the pressure of auxiliary pressure roller is set 0.3Mpa. In the cylinder, we install the Exhaust Throttle Valve so that it can adjust the movement speed of the cylinder. Principal Performance Parameters of OEM40iX laser generatorSpecification:General performance and parameters of HANS*GS-D400P perforating machineShut--down operation steps1.After the work completes, you can rotate the key switch till the shut-down position. 2.Close the cooler and gas source. Cooler temperature setting1.The normal working temperature range of Laser Generator is 19ºC-27ºC.2.The cooler temperature setting range is : 20ºC±1ºC.3.About the detailed setting method, please see " Cooler manual".Boot-strap operation steps1.When you start up the cooler manually, please check if there is water leakage in all of the connections. Wait till the cooler working temperature reaches the setting temperature.2.Open the gas source, and examine if there is any water leakage in all of the connections. Check whether the barometers in the panel stay the setting pressure or not; 3.Enter the operation page, choose " Automatic" mode, the control system will start up the polygon prisms and blowing protection; meanwhile the system will start up "LASER_ON","LASER_EN","SHUTTER", "Laser light" one by one.4.Pay attention that after "SYS_EN" and"LASER_ON"show green light, it means that it has completed laser light; Application:This set of equipment can realize ventilation and tar reducing through perforating tipping paper of cigarette filter tip in production line and to reduce the harm of smoking to human body.
Свойства товара
- Model NO: GS-DKJ400P
- After-Sales Service Provide: Engineers Available to Service Machinery Overseas
- Certificatio: ISO 9001, RoHS, CE, GS
- Controlling Mod: CNC
- Power Sourc: Mechanical
- Conditio: NEW
- Typ: Automatic Hole Puncher
- Hole Numbe: 8
- Minimum Perforating Densit: PC/10mm
- Controlle: Germany Siemens Servo System
- Form Feeding Contro: Biaxial Linkage Control
- Permeability Rang: 100-2000cu
- Permeability Instabilit: Less Than 5% (Relative Error)
- Hole Diameter Rang: 0.05-0.25 mm
- Trademar: HAN′S GS
- Transport Packag: Plywood Cases
- Specificatio: CE
- Origi: Wuhan City, China
- HS Cod: 8456100090