Automobile Interior Material Combustion Testing Machine

Гарантия возврата денег, если товар не подойдёт

Описание LX-8063 Automobile interior system combustion testing machine Application field: This combustion testing machine is usually applied to auto (car,multipurpose passenger coach and truck) interior material's horizontal combustion characteristics.Certification: Meets GB8410-2006, TL1010, GM6090M, DIN7520, GM9070P, MVSS302, GS97038 standards etc. Testing method: The sample was put horizontally on the U shape bracket, a small flame lighted at the sample free end for 15s in the combustion chamber. Record whether the flame extincted,or when it will extinct. And the sample burning distance, burning time for this distance. Data read: Burning time, remaining flame time, burning diatanceTesting result: the burning speed V(mm/min) converts as the following formula:V=60X(L/T). L means the burning distance(mm); T means the needed time to burn this distance(s). The biggest burning speed is the testing result.Commponent: Burning system: Anticorrosive combustion box, gas burner nozzle with 9.5mm diameter; automatic ignition control system, intake/exhaust systemTiming system: burning timer, afterflame timer Testing fixture: Two pieces of U shape frame made from corrosion resistant metal plate. Under one of the frame, there are 0.25mm diameter heat resistant metal wire with the distance of 25mm.Glass observation window: In the front of combustion chamber is a heat resistant glass observation window to see the burning speed change when burning.Stainless steel chamber: below the chamber, there are ten vents with diameter 19mm, the walls of the vent is near the top, and there is ventilation slot with 13mm width. The whole combustion chamber is supported by four feets with 10mm height. A small hole for inserting thermometer is on the top of combustion chamber and 20mm far from the frame. Main parameters: Nozzle center is 19mm far from the sample free end center The sample bottom is 178mm far from the bottom surface The sample bracket front is 22mm far from internal surface of the combustion chamber11. The second loongitudinal outside of test bracket is 50mm far from combustion chamber inside12. The first supporting point of test bracket is 38mm far from the front13. The second supporting point of the test bracket is 100mm far from the first supporting point14. The third supporting point of the test bracket is 254mm far from the second suppoeting point15. Heat resisting metal wire diameter: 0.25mm16. Spacing between the heat resisitng metal wire: 25mm17. The metal wire length is more than 110mm, there are 7-8 around tooth per 25mm 19. Timer setting: 15s(0-99.99/S/M/H adjustable)
Свойства товара
  • Model NO: LX-8063
  • Functio: Cleared
  • Displa: Digital
  • Usag: Electric Component Tester, Gas Sensor Tester, Catalytic Element Tester, Lightning Protection Device Tester
  • Environmen: Room Temperature
  • Warrant: With Warranty
  • Power Sourc: DC 100V-300V
  • Weigh: 0-10Kg
  • Installatio: General Installation Meter
  • Customize: Customized
  • Accuracy Degre: 0.5
  • Meet a Criterio: GB8410-2006, Tl1010, GM6090m, DIN7520, GM9070p, Mv
  • Structur: Room
  • Colo: Same as The Picture
  • Deliver: 10 Working Days After Order
  • Trademar: Lianxin
  • Transport Packag: Standard Wooden Case
  • Specificatio: 385X204X360 mm
  • Origi: Shenzhen, China

Комментарии

Популярные объявления