Набор для очистки двигателя "ГЕНЕРАЛЬНАЯ УБОРКА ДВИГАТЕЛЯ" VMPauto, для объема до 2.5л

Гарантия возврата денег, если товар не подойдёт

Описание KIT FOR COMPLETE CLEANING OF THE ENGINEGENERAL CLEANING - a set for a comprehensive cleaning of the car engine. Effectively cleans the combustion chamber, valves, compression and oil rings. Protects working surfaces from wear after cleaning. Consistent application of decarbonization, decarbonization and remetallizant increases the efficiency of the cleaning procedure. Remove coils and spark plugs. Set the pistons to the middle position. The engine should be warm, but not hot. Spray the composition into the candle well until it is completely filled with foam. pump out impurities with a tube and syringe, blow with compressed air. Close all spark plug holes with a rag to prevent splashing of liquid. Scroll the engine with a starter for 10 seconds. Install all spark plugs and ignition coils. Start the engine and let it run for 5 minutes. Thick smoke may come out of the exhaust pipe. It is necessary to raise the engine speed several times to 3000-4000 rpm until the smoke becomes less saturated. On heavily polluted internal combustion engines, it is recommended to repeat the procedure after 10 thousand km. It is advisable to replace the engine oil and filter. To protect and restore the internal combustion engine from wear, we recommend using RESURS (4302) metal cladding compounds. To clean the intake manifold Warm up the internal combustion engine to operating temperature, disconnect the plastic part of the intake manifold. The engine should be warm, but not hot. It is recommended to set the treated valves to the closed position. Spray the composition into the intake manifold of the cylinder head until it is completely filled with foam. After the foam has settled, let the composition react with soot for 5-7 minutes, then repeat step 3 and item 4. 5 repetitions are recommended. Remove the remains of the contaminated composition with a rag, then blow the collector with compressed air, covering the wells with rags. Avoid contact with skin, eyes, mucous membranes. Assemble the intake manifold, after which it is recommended to clean the combustion chamber. RASKOKSOYL VALERA Keep the composition at room temperature for 6 hours before use. Check the oil level and select the correct dosage of the composition. The 100 ml bottle is designed for 4-5 liters of oil. With a different amount of oil, the dosage is not more than 25 ml per 1 liter of oil. Warm up the engine to operating temperature, turn off, open the oil filler neck. Pour the composition at the recommended dosage into the old oil or into the new, flushing oil. in the range of 1700-2300 rpm for 20-25 minutes. Stop the engine and let it cool down to safely drain the used oil.
Свойства товара
  • Тип: Очиститель двигателя
  • Форма выпуска: Готовый раствор
  • Страна-изготовитель: Россия
  • Область применения: Двигатель
  • Назначение: Очистка, Восстановление, Обслуживание

Комментарии

Популярные объявления