Армейская палатка пмх
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://images.ua.prom.st/7212099_namet-armijskij-pmh.jpg']
- url: https://besplatka.ua/ru/obyavlenie/namet-armiiskii-pmh-6753ea
- City: Skadovsk
- description: Army tarpaulin tent-bakery factory. Purpose and use The PMH tarpaulin tent is usually called a bread factory tent by army vets among themselves. This tent is called so because the PMH tent is primarily intended for placing the mobile equipment of the bakery in the field. It can also be used as a mobile point for repair and mechanical workshops and other purposes. However, such a large tent as PMH turned out to be quite inconvenient for repairing cars and armored vehicles in the field. A completely different tent was developed for such tasks - the P-20 production tent on a metal frame, which did not have central racks. Features of production The production of PMH tents is a complex technological process due to the large size of the tent. For sewing the outer tent, tarpaulin fabric with light-resistant combined anti-rot impregnation of increased water resistance is used, and the inner tent and walls are insulated with cotton fabrics. The device for setting up a tent is traditionally made of wood. The PMH tent has a four-pitched roof with a ridge, four vertical walls and two chimneys. On each end wall, in the center, there are 2 windows with light protection valves and 2 entrances with hinged curtains. In the center, on each side wall, there is an entrance with a vestibule, and to the right and left of it there is one window with light protection valves. In total, the tent has 8 windows and 6 entrances/exits. The tent delivery kit includes: outer and inner tents, hinged warming walls, rigging and installation equipment. Transportation and storageTransportation of tents is carried out by any type of transport with mandatory protection from getting wet, dirty and mechanical damage. Tents should be stored in clean and dry rooms with natural ventilation and light. Wooden and metal parts can be stored under a canopy with strict observance of the conditions for protecting them from dust, snow and rain. All tents laid for storage should be inspected at least twice a year and, if necessary, shifted for airing and drying. .7 Baste length (from the wall to the wall of the inner basting), m 11.3 Width of the baste (from the side to the wall of the inner basting), 7.5 m m 84.7