✅ профессиональный фрезер для ногтей nail master zs-603 35w
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://images.ua.prom.st/2762774568_professionalnyj-frezer-dlya.jpg', 'https://images.ua.prom.st/2762774570_professionalnyj-frezer-dlya.jpg', 'https: //images.ua.prom.st/2762774572_professionalnyj-frezer-dlya.jpg', 'https://images.ua.prom.st/2762774573_professionalnyj-frezer-dlya.jpg', 'https://images.ua. prom.st/2762774574_professionalnyj-frezer-dlya.jpg', 'https://images.ua.prom.st/2762774575_professionalnyj-frezer-dlya.jpg', 'https://images.ua.prom.st/2762774576_professionalnyj- frezer-dlya.jpg']
- url: https://besplatka.ua/ru/obyavlenie/professionalnyi-frezer-dlya-nogtei-nail-master-zs-603-35w-828872
- City:: Kyiv
- description: ✅Professional nail cutter Nail Master ZS-603 35WPayment for goods - upon receipt by mail! Professional nail cutter Nail Master ZS-603 with a power of 30 watts and a maximum speed of 30 thousand rpm is perfect for hardware manicure, upper nail correction (gel and acrylic). It is excellent for these tasks for the following reasons. The case of the device with an interesting design is reliably made of a pleasant to the touch, matte plastic, from which dirt can be easily removed with improvised means. The body dimensions are small - width 11.7 cm, length 15.4 cm, height 7.2 cm. On the front side of the device there is a knob-regulator for controlling the speed of rotation of the cutter. Its smooth running will allow you to precisely set the desired speed in the range from 5000 to 30000 rpm. The sticker at the base of the regulator shows the speed adjustment ranges, which will simplify the choice of operating mode. Nearby you will find a light indicator of device activity. On the top of the router there is a notch-stand for placing the milling handle. Its inside is equipped with rubber mini-supports that prevent scratches on the handle or router body. A 1.5 meter non-removable power cable is located at the rear of the router next to the foot pedal connector and the control mode switch - pedal or handle. The power switches, the direction of rotation of the cutter (clockwise and counterclockwise), the connector for connecting the milling handle are located on the right side of the device. On the left side there is an electrical voltage switch - the milling cutter is able to work in networks of 110 and 220/240 volts. Give him attention After all, an incorrectly set parameter can lead to a breakdown of the router. In the sockets of our houses, the voltage corresponds to the value of 220 volts. All switches work smoothly, and the connectors will ensure a reliable connection to the pedal and handle. It is worth noting the low noise level and the absence of vibrations during the operation of the handle. Also, the handle practically does not heat up due to the motor cooling system built into it. This prolongs the duration of its operation in continuous mode. Nozzles are securely fixed by turning part of the handle - this mechanism is called Twist Lock. The clamp can only be activated with the inserted nozzle or the plug-rod included in the kit. Closing the lock without a nozzle can lead to failure of the locking mechanism. The handle is compatible with any nozzles, provided that the rules for their use are followed (see below). The router comes with a foot pedal that operates in two modes - on / off. The rotation speed of the cutter is set by the regulator on the cutter block. Together with the router, you get a set of 6 diamond-coated tips and a set of disposable disposable grinding caps. This minimum set will allow you to perform a significant part of the steps from the hardware manicure and pedicure procedure. Equipment: Power supply, micromotor handle, set of diamond cutters, foot pedal. . Switch the direction of rotation only when the cutter is stationary.3. The maximum rotation speed is determined by the size and weight of the nozzle used. Follow the recommendations of the manufacturer of cutters.4. Keep the machine clean. Try to remove dust and other small particles at the end of each working day.5. Observe the intermittent operation of the router. The duration of work should be no more than 5-7 minutes, after which the technique should be given a rest for the same time. Guarantee 5 months III We send all over Ukraine, cash on delivery (payment upon receipt) delivery 1-3 days.