✅маникюрно-педикюрный станок jd-500 45000 об/мин, 35 вт
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://images.ua.prom.st/2762785219_frezer-dlya-manikyura.jpg', 'https://images.ua.prom.st/2762785222_frezer-dlya-manikyura.jpg', 'https: //images.ua.prom.st/2762785226_frezer-dlya-manikyura.jpg', 'https://images.ua.prom.st/2762785228_frezer-dlya-manikyura.jpg', 'https://images.ua. prom.st/2762785231_frezer-dlya-manikyura.jpg', 'https://images.ua.prom.st/2762785233_frezer-dlya-manikyura.jpg']
- url: https://besplatka.ua/ru/obyavlenie/frezer-dlya-manikyura-i-pedikyura-jd-500-45000-oborotov-35-7726ad
- City:: Kyiv
- description: ✅Cutter for manicure and pedicure JD-500 45000 rpm, 35 WattPayment for the goods - upon receipt by mail! Milling cutter JD-500 45000 rpm is designed for hardware manicure, pedicure and correction of helium and acrylic nails. The main characteristics of any router are power, rotation speed and torque. Power consumption is measured in watts and shows how much electricity the router consumes. The power of the router JD-500 45000 is 35 watts. The rotation speed is measured by the number of revolutions of the cutter per minute, so the maximum rotation speed of the router is 45000 revolutions per minute. Torque indicates the force with which the cutter rotates. The higher the torque, the more external force is required to stop the cutter. Torque JD-500 45000 2 Newton/cm. Thus, this router allows you to do only hardware manicure and nail correction, but is not suitable for hardware pedicure. The kit includes a power supply, handle, stand, foot pedal, a set of nozzles. Using the router is very simple. We connect the handle to the power supply. Also turn on the footswitch if you use it. Before you turn on the router, you must install the nozzle. The mechanism for fixing the nozzles snaps the cutter and holds it tightly, thereby preventing vibrations during the robots. To avoid breakage, it is not recommended to close the handle without a nozzle or plug rod. Turn on the power using the button on the front panel of the unit. When turned on, the red button lights up. In manual control, a mechanical regulator on the power supply is used, with which we adjust the speed of rotation of the cutter. In the foot control mode, turn off the power using the button on the control panel, use the mechanical regulator to set the rotation speed. When you press the pedal, the router starts working and the light to the right of the power regulator lights up. To enable reverse, that is, rotation in the opposite direction, it is necessary to turn off the router. To do this, set the speed control to 0 or release the foot control pedal, then set the reverse switch to R and then turn the router on again. In order to avoid breakdowns, it is not recommended to turn on the reverse on the go. The level of noise and vibration is low, so we recommend it for professional use. You can buy a nail cutter in Ukraine in our BEAUTY-SVE online store. Delivery across all Ukraine. III We send all over Ukraine,