✅скоростной маникюрный фрезер strong 204 65w (оригинал) 35000
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://images.ua.prom.st/2762774579_vysokoskorostnoj-frezer-dlya.jpg', 'https://images.ua.prom.st/2762774580_vysokoskorostnoj-frezer-dlya.jpg']
- url: https://besplatka.ua/en/obyavlenie/vysokoskorostnoi-frezer-dlya-manikyura-strong-204-65w-d3e0a8
- City:: Kyiv
- description: ✅High-speed manicure router Strong 204 65W (original) 35000 rpmPayment for goods - upon receipt by mail! trong-204. 2150UAHProfessional high-speed router Strong 204 (original) is suitable for manicure, pedicure and correction. Strong devices from a Korean manufacturer for nail service have proven themselves due to their small size, power and endurance. Rotation speed 1000 to 35000 rpm. with a reverse (with switching of rotation in the opposite direction). Power is 65 Watts. Set: - milling cutter; - power supply unit; - milling cutter handle; - pedal. Size 108x131x77 mm. Important information for owners of the strong 2041 machine. We insert the cutter, leaving the distance from the handle to the cutter 2mm-5mm, this will ensure the long operation of the micromotor (handle)2. Do not use the device if your hands are wet or in any means (eg cream), store the device with the test rod in the chuck or cutter.3. Switching the direction of rotation of the nozzle should be done only at zero speed of rotation of the nozzle. Otherwise, the device may quickly fail.4. Smoothly, without jerks, adjust the rotation speed of the nozzle. 5. Move the power button of the device to the “0” position every time the nozzle is changed. 6. Use only standard, high-quality, balanced nozzles (milling cutters) intended for nail correction and pedicure procedures. 7. Do not insert dusty and dirty nozzles into the device!!!!! Clean them before inserting them into the device 👉Attention! It is forbidden to close the clamp and turn on the micromotor (handle) without the rod that comes with the device or the installed nozzle, that is, the cutter. This leads to the failure of the device and is NON-WARRANTY case.8. DO NOT turn on the device if the rod or nozzle is not installed in it.9. Do not drop the device, the worst thing when the device falls is damage to the bearings.10. If you do not work for more than 3 hours, it is recommended to turn off the device from the network.11. Use the device with a surge protector to avoid problems associated with power surges Guarantee 9 months III We ship all over Ukraine, cash on delivery (payment upon receipt) delivery 1-3 days. original) 35000 rpm Availability: In stock the most terrible thing when the device falls is damage to the bearings.10. If you do not work for more than 3 hours, it is recommended to turn off the device from the network.11. Use the device with a surge protector to avoid problems associated with power surges Guarantee 9 months III We ship all over Ukraine, cash on delivery (payment upon receipt) delivery 1-3 days. original) 35000 rpm Availability: In stock the most terrible thing when the device falls is damage to the bearings.10. If you do not work for more than 3 hours, it is recommended to turn off the device from the network.11. Use the device with a surge protector to avoid problems associated with power surges Guarantee 9 months III We ship all over Ukraine, cash on delivery (payment upon receipt) delivery 1-3 days. original) 35000 rpm Availability: In stock