Inline centrifugal sound- and heat insulated fan VENTS VKPFI 6E 600x300
Гарантия возврата денег, если товар не подойдёт
Описание
Technical data Model VKPFI 6E 600x300 Voltage [V] 230 Frequency [Hz] 50 Phase 1 Number of poles 6 Power [W] 419 Current [A] 2.05 Max. air capacity [m3/h] 2260 RPM [min-1] 870 Noise level at 3 m [dBA] 42 Transported air temperature [°C] -20 +70 Protection rating IPX4 Weight [kg] 56 Sound- and heat-insulated casing 1 Spigot size [mm] 600х300APPLICATIONS–Supply and exhaust ventilation systems for various premises with a limited mounting space. –Designed for connection with 400x200, 500x250, 500x300, 600x300, 600x350, 700x400, 800x500, 900x500, 1000x500 mm rectangular air ducts.DESIGN–The fan casing is made of galvanized steel.–VKPFI models are heat- and sound-insulated with 50 mm layer of mineral wool. MOTOR–The impeller with forwarding curved blades made of galvanized steel is powered by 4-, 6- or 8- pole external rotor asynchronous motor.–Such modification ensures high air flow capacity and relatively significant differential pressure.–For thermal overheating protection, the thermal contacts with leaded outside terminals are incorporated in the motor winding for connection with the external protection devices. –The motor is equipped with the ball bearings for long service life.–For precise features, safe operation and low noise, each impeller is dynamically balanced while assembly.–Motor protection rating IP 44.SPEED CONTROL–Smooth or step speed control with a thyristor or autotransformer speed controller. –Several fans may be connected to one speed controller provided that the total power and operating current do not exceed the rated speed controller parameters.MOUNTING–The fans are designed for inline rectangular air duct mounting and require no special fixing in case of direct connection.–In case of connection through the flexible connectors the fan is fixed to a building by means of supports, suspension brackets or fixation brackets. –The fans can be mounted in any position with respect to the pointer direction on the casing.–Access for the fan maintenance shall be provided.–The fan is powered through the external terminals.–The casing is provided with the removable access door for maintenance.VENTS VKPFI fan office ventilation exampleOur companyVENTS is the worldwide ventilation leader.This deserved status is confirmed by our partners’ and consumers’ acknowledgment worldwide, by more than 50 million units of manufactured and sold products and finally by the honorable membership in the largest worldwide HVAC associations.The VENTS product range includes above 10 000 items for residential and industrial ventilation, specially cut for different target audiences and various climatic areas.The VENTS manufacturing facilities are located at more than 60 000 m2. Each of 16 workshops is tooled up in compliance with international standards to cover the fully-featured production cycle. The enterprise engages more than 2000 professionals. Their teamwork is aimed to provide ready ventilation products from an idea and design development up to the ready high-tech product. VENTS ongoing development strategy is based on the implementation of innovations and application of advanced technologies in climatic equipment.Energy savingUse of high-efficient EC-motors that have energy demand up to 50% less as compared to standard motors with the same performance characteristics is the most advanced energy-saving solution from VENTS.The electricity bills are by 30% less with EC-motors! Integration of variously designed heat exchangers into ventilation units with the purpose of utilization of extract air heat or cold for warming up of supply air is another energy-saving technology from VENTS. VENTS equipment based on geothermal and solar energy sources is also a part of our energy-saving ventilation segment.Energy saving ventilation is one of the first-rated developments in the VENTS strategyWhat does ErP mean?The Energy related Product (ErP) Directive affects any product that consumes energy (excluding methods of transport). The main aim of ErP is to dramatically reduce the harmful gases produced by these products that pose risk to the environment.The importance of being ErP compliantSince September 2015 the Energy related Product (ErP) Directive has impacted boilers, water heaters and hot water storage tanks. Potterton Commercial are committed to ensuring that all products are compliant and all heating professionals understand ErP regulations.ErP ObjectivesThe ErP Directive was designed to reduce harmful non-environmentally friendly emissions from energy consuming products. This is to contribute to the European Union's 20-20-20 targets on climate change and energy.20-20-20 targetsThere are three main objectives for 2020:A 20% reduction in EU greenhouse gas emissions compared to 1990 levelsRaising the share of EU energy consumption produced from renewable resources to 20%A 20% improvement in the EU's energy efficiency.Cost SavingsThe ErP directive is also designed to help reduce energy costs for the consumer and to allow manufacturers to reduce their carbon foot print without incurring excessive costs.QualityDue to inner technological normative documentation and thoroughly designed quality control system, VENTS products always meet the strictest quality and safety standards (CE) and are certified by the most reputable international certification institutes and organizations – TUV (Germany), PCBC (Poland), EVPU (Slovakia), Ukrtest (Ukraine), RosTest (Russia), AMCA (USA), HVI (USA), Energy Star, Hardi (US), DIBt (Germany), IEC (Switzerland), RoHs (EU), EUROCERT (EU), Passive House (Germany), SGS (EU).VENTS manufacturing process is certified in compliance with international quality management system for organizations and enterprises ISO 9001:2000Compliance with modern worldwide standards is an integral part of any VENTS product!LogisticsEfficient organization of logistics makes it possible to deliver any VENTS products everywhere anytime.The stock resources are optimized in such a way to minimize any product delay at a stock. Control of the flow of goods, documents circulation, the internal and external communication process is a smoothly running business process designed to expedite the goods dispatch and delivery.The storage facilities are equipped following European standards and fitted with modern hoist machinery for cargo operations.
Свойства товара
- Mounting: Duct Fan
- Place of Origin: Ukraine
- Brand Name: Vents
- Model Number: VKPFI 6E 600x300
- Power: 419W
- Voltage: 230V
- Air Volume: 2260 m3/h
- Speed: 870 RPM
- After-sales Service Provided: Engineers available to service machinery overseas
- Certification: CE
- Protection Rating: IP X4
- Type: Centrifugal Fan
- Electric Current Type: AC
- Blade Material: galvanized steel