Гнездовой термостат mtp1, для обогревателей, инкубаторов
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://besplatka.ua/aws/746x-/21/67/14/28/rozetochnyi-termoregulyator-mtr1-dlya-obogrevatelei-photo-8d57.jpg']
- url: https://besplatka.ua/ru/obyavlenie/rozetochnyi-termoregulyator-mtr1-dlya-obogrevatelei-6e8733
- City: Kharkiv
- description: MTP1, socket-type thermostat, single threshold, used to control the temperature in rooms where it is necessary to achieve a temperature control accuracy of 0.5 °C. Ideal for NEP heaters. The MTP1 thermostat is a digital instrument. This temperature controller shows the current temperature value on its electronic display and regulates from -55°С to +100°С. Accuracy 0.5°C degrees. The set temperature value is programmed in any range from -55 to +100 degrees. "Plug in the socket". Technical characteristics of the thermostat: limit of measurement and regulation: -55 ... + 99.9 ° С; measurement error: 0.5°С; load on the contacts of the thermostat relay relay: 2 kW supply voltage: ~ 220V; external digital temperature sensor DS18B20 sensor wire length ~ 1m; number of indicator digits: 3; Price 260 hryvnia as of 01/05/2018. Price 11 $.Setting: Insert the device into the socket. The display will show the current temperature. Press and hold the Down button. In flashing mode, the set temperature value will be displayed (load on and off ± 1 ° C). Use the Up or Down buttons to set the desired value. Release the buttons. After 5 sec. the instrument will save the set value. All settings are automatically stored in the instrument's memory until the next reset. In the operating mode of the device, the red dot periodically lights up and goes out. It can be used to determine whether the load is on or not. After completing all the settings, you can connect to a power outlet, located in the device under the indicator, a plug of a heater or other device with a load of not more than 2 kW. The price is 250 hryvnia. You can order: