Регулятор тяги Regulus RT4 3/4 для твердотопливных котлов
Гарантия возврата денег, если товар не подойдёт
Описание
Draft regulator Regulus mod. RT4Uninterrupted regulation of the air supply to the solid fuel boiler will be provided by the Regulus RT4 draft regulator. The product is a chain-type thermostatic regulator. The device makes exact control of a stream of air of combustion of solid fuel. Hundreds of buyers prefer a mechanical regulator, since its cost is an order of magnitude lower than an electronic counterpart. In addition, the device does not need to be connected to the mains, which contributes to significant savings in electricity costs. The body of the device is made of reliable brass, covered with a chrome layer. The RegulusRT4 handle is made of impact-resistant plastic. The Regulus engineers selected galvanized brass as the material for the immersion sleeve, which is resistant to corrosion. The chain and lever are made of galvanized steel. Unlike the previous model RT3, Regulus RT4 has an increased resistance to stress and can work in a dusty environment. In addition, the device is not afraid of abrasion of the scale with numbers. Principle of operation The principle of operation of RegulusRT4 is quite simple. If the temperature in the combustion chamber exceeds the set threshold, the regulator will lower the lever down, thereby closing the damper. If the temperature in the chamber drops, the lever will rise and open the shutter. Technical features The device regulates in the temperature range from 30 to 90 degrees Celsius. In this case, the temperature indicator of water should not exceed 120 ° C. High resistance to temperature changes is a distinctive feature of Regulus developments. Mounting the regulator To install the device, connect the ¾” external thread to the internal thread of the fitting located on the boiler. A seal must be used during installation. As a sealant, Siseal mastic and Teflon tape are widely used. The device can be mounted in different positions. In the case of a horizontal installation of the RegulusRT4, the device must be turned in such a direction that the tip for fixing the rod is at the bottom. When mounting the regulator vertically, the direction of the tip should be forward, and when mounting the regulator horizontally, the tip should be directed upwards. Then fix the rod with a screw. Please note that its free end must be placed above the chain holder on the boiler door. In this case, the lever arm should be as close as possible to the horizontal position of the hexagon. A large hook fixed to the chain should be inserted into the hole in the Regulus RT4 arm. Pass the opposite end of the chain through the holder, which is located on the door of the solid fuel boiler. The free end should be fixed with a free hook on a hanging chain. The correct position of the chain and lever is checked by turning the button - the chain should hang freely, the lever should move without difficulty. During the horizon
Свойства товара
- Тип: Автоматика для котла
- Гарантия: 1 год
- Бренд: Regulus
- Вид топлива: Древесные брикеты, Дрова, Пеллеты, Уголь, Угольные брикеты
- Страна-изготовитель: Словакия