Магнитная зарядная база для ручки очков виртуальной реальности Oculus quest 2
Гарантия возврата денег, если товар не подойдёт
Описание
1. When the charging cradle charges the VR helmet and two handles at the same time, the charging cradle must be equipped with a charger with an output power of more than 5V2A to ensure sufficient current. 2. The original charger included with 0culusQuest2 can be used for this charging cradle. Headset Charging Steps must purchase it separately). The charging seat turns green and enters standby mode when turned on2. Insert the Type-c magnetic head into the charging hole of the helmet. 3. Place the helmet vertically in the appropriate position to charge the charging base. When charging starts, the charging LED indicator lights up in yellow At the beginning, the stand LED indicator lights up in yellow (Note that the handle is divided into left and right, please place the handle according to \"L\" and \"R\" marks on the stand ) If you want to take out the magnetic head of the pen, please use the included needle to pull out the magnetic head. Specification: Battery type: Lithium polymer battery . Battery capacity: 1800 mAh. Battery life: about 36 hours. Required charger output: 5V More than 2A. Charging current: Helmet: max. 1.4 A Pen: max. 500mA Charging time: helmet: about 3.5 hours Handle: about 2.5 hours Dock charge indicator Standby: green light Charging: yellow light Fully charged: green light Specifications: Need charger output: 5V More than 2 steps for charging pen1. Connect a 5V2A or higher charger to the charger (charger is not included in this package, customers need to purchase it separately). The charging seat turns green and enters standby mode when turned on2. Slide the battery cover of the handle down and remove the battery cover3. Install the pen battery. When installing, pay attention to the Type-C charging port of the battery as much as possible.4. Attach the supplied battery cover to the handle5. Using the supplied needle, adjust the Type-C charging port of the battery to match the hole in the battery cover6. Insert the magnetic head into the Type-C charging port of the battery through the hole in the battery cover7. Place the handle in the appropriate position to charge the charging base and allow the magnetic suction head to charge.Color: WhiteMaterial: ABSPackage Contents: >1 Charging Base2 Batteries2 Battery Covers4 USB Type C Magnetic Heads1 Magnetic Head Removal Needle1 1.2m Charging CableOnly the above contents package, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.
Свойства товара
- Тип: Накладки для очков виртуальной реальности
- Цвет: Белый
- Назначение 3D очков: Универсальные
- Страна-изготовитель: Китай