Электромагнитный водопроводный клапан (пластик), 1/2 дюйма, соленоидный, 220В, водоснабжение,NT8048M AC220V Мастер Кит

Гарантия возврата денег, если товар не подойдёт

Описание NT8048M AC220V Solenoid Water Valve (Plastic) Water Valve NT8048M AC220V solenoid water valve is designed to control the flow of liquid in the pipeline (water pipeline). The valve is easy to use and has a fairly diverse scope and can find a place in the management of water supply within home and industrial automation, for example: smart home systems as part of the BM8039D; country pools; automatic irrigation systems as part of MP8036; heating systems; aquariums, etc. It has a normally closed design. Voltage is required to open the valve. When the voltage is removed, the valve closes. Note that some fluid pressure in the pipe is required to close the valve. Thread diameter 1/2 in. Solenoid valve Some fluid pressure in the pipe is required to close the valve. In gravity systems, the valve will not work. The valve coil is rated at 220 volts, so it makes a slight noise when turned on, which is normal operation for AC control systems. Please note that the valve control coil (solenoid) will heat up during operation. Therefore, the maximum operating time should be no more than 15 minutes (depending on the temperature of the liquid), after which the valve must be turned off for a while to allow it to cool. Valve If necessary, the valve power contacts can be turned in any direction. Since the mounting holes of the coil are symmetrical, unscrew the four mounting screws and, without removing the coil, turn it in any direction, then install the screws in place and fix them tightly. In the production of the solenoid valve NT8048M AC220V, only high-quality components are used, which ensures the reliability and durability of the valve even after the warranty period. Technical characteristics Supply voltage, V 220 Type of power supply variable Coil power, W 5 Housing material plastic Working pressure, not more than MPa 0.8 Connection diameter 1/2“ DIN15 Working temperature of liquid, not more than °С 50 Length, mm 85 Width, mm 75 Height, mm 46 Weight, g 105 Shipping weight, g 128FeaturesSolenoid valveValve capacity at 0.8 MPa 25 L/min Presence of a coarse filterThe valve with an operating voltage of 220 Volts emits an inaudible low rumble during operation, which is a normal phenomenon for alternating current control. Principle of operationThe valve is in normal condition (in the absence of voltage) closed, fluid flow is not possible. To open the valve, a control voltage must be applied to the solenoid winding. The valve is designed in such a way that the main work of keeping the valve open is performed not by electrical energy, but by the energy of the water flow, therefore the valve is very economical in terms of energy costs. . open
Свойства товара
  • Диапазон рабочих температур, °С: 1-50
  • Тип: Модуль расширения
  • Вид модуля: Исполнительный элемент
  • Макс. ток, А: 0.025
  • Макс. напряжение, В: 220
  • Количество в упаковке, шт: 1
  • Бренд: Мастер Кит
  • Цвет: Белый
  • Степень защиты: IPX0
  • Монтаж: Открытый

Комментарии

Популярные объявления