Комплект для беспроводного управления освещением ПУ1-МK-2 (2 канала) "Уютный дом" электроприборами, пульт, радиус 30м

Гарантия возврата денег, если товар не подойдёт

Описание Kit for wireless lighting control PU1-MK-2 (2 channels) smart (smart) "Cozy home" from TDMElectric is designed to remotely turn on / off this type of lighting such as: sconce, light bulb, lamp, children's lamp, nightlight for children , suitable for LED lamps, LED strips, as well as garden and park lighting via radio using a control panel or a stationary switch. The smart home system serves to turn off various light sources in the room with one button, including LED lamps. The relay with remote control for light control is used to control lighting in commercial, residential and industrial premises. The set of wireless light control consists of a controller (receiver MK-2) and a control panel (PU1), which are connected and operate via a radio channel. There is no need to lay additional wires, you can connect 4 load channels to a two-wire system: for example, a chandelier + spotlights + LED strip + Led strip. The control unit is a ready-made basic kit to start using. Range 30 meters (in open space). The radio signal passes through the walls, so it is possible to control the receiver from the radio switch located in the adjacent room, as well as hide the receiver in a mounting box, under the ceiling, in the luminaire housings. The wireless smart home kit is very convenient to use. This lighting control kit provides the function of turning off all lighting groups with a time delay of 15 seconds. Each controller has a unique channel for communication only with "its" remote control, neighboring devices do not intersect with each other. To protect against false alarms, the light switch receivers have a radio signal encryption program that protects against interference from external control panels and other radio-controlled devices. The control panel is powered by a 1×12V/A23 battery, which makes this product electrically safe and eliminates the risk of electric shock. It is necessary to install a wall switch in the power supply circuit of the controller (in order to avoid unauthorized connection of the first channel in case of loss and subsequent restoration of the mains supply voltage). In the event of a mains voltage failure and its subsequent restoration, the controller will automatically turn on the first channel, so it is recommended to turn off the wall switch that feeds the controller when leaving the room for a long time. Diagrams for connecting controllers to the network are presented in the product data sheet. The wireless control kits are completely ready for use immediately after opening the package. The transmitter / remote light switch is mounted on the wall using double-sided tape (included) or self-tapping screws. This lighting automation technology definitely deserves your attention. The signal is transmitted over a radio frequency of 433.92 MHz. System signal penetration rate intelligent with

Свойства товара

Комплект для беспроводного управления освещением ПУ1-МK-2 (2 канала) "Уютный дом" электроприборами, пульт, радиус 30м

Комментарии

Популярные объявления