Умный шаровый кран с электроприводом для умного дома для воды и газа - DN15 (1/2")

Гарантия возврата денег, если товар не подойдёт

Описание The crane with the electric drive is intended for installation in systems of water supply and heating of the "smart house". It can also be used to shut off the gas supply. It can be used in water leakage protection systems, as well as emergency closing of water valves. Capabilities: Automatic closing of ball valves. Easy installation and easy operation This electric ball valve is made of high quality brass, durable for use. .Specifications: - DN15 (1/2\") - Valve material: brass - Working temperature: normal - Rotation: 90 degrees - Working pressure: 1.6 MPa - Connection: thread - Power supply: 220 V AC - Control Method: 2 Way 3 Wire Model: DN15(1/2\") Size: 12*7*6cm/4.7*2.8*2.4in, 13*7*6.3cm/5 .1 * 2.8 * 2.5 inch Quantity: 1 piece Driver motor: Hysteresis synchronous motor Driver working voltage: AC220V Power consumption: ≤ 7.5VA Valve pressure: 1.6Mpa Allowable pressure difference: ≤ 0.13Mpa Suitable for: cold water, hot water Suitable liquid temperature: 2℃-95℃ Ambient temperature: 0℃-60℃ Working time: about 10 seconds Closing time: about 5s Connection method: SR (double color): COMBR (brown): closed valveBL (blue): valve opening 1, cut off the power supply before installation, and it must be installed by professionals. 2, the flow direction must be the same as the direction arrow on the valve body. 3, the valve must be located above the water tray to ensure that water drops fall into the water pan. 4, the valve and driver must be installed within ± 60 ° in the vertical direction, and there must be at least 30mm of space above for dismantling. 5, there must be enough space from the surrounding pipes, devices and construction work for technical maintenance, and make sure that the place is reached by maintenance personnel through the hatch.6, two or more valves cannot be connected at the same time. If you really need a parallel connection, use a relay for isolation.7. Install the valve first and measure the pressure with the pipeline, then install the driver.8. If the driver is already installed on the valve, do not apply force to the driver during installation and repair work, otherwise the driver will be damaged. 9, the disc cannot be wrapped with thermal insulation material, otherwise it will affect its heat dissipation. be based on securely with wires not less than 1.5mm≦2, other wires should be in accordance with electrician standards. 11, after installation and make sure everything is correct, turn on and debug without water. Follow three full dial actions, if possible, until all parts are normal and correct. 12, after adjusting without water, then

Свойства товара

Умный шаровый кран с электроприводом для умного дома для воды и газа - DN15 (1/2")

Комментарии

Популярные объявления