2 шт Универсальный пульт дистанционного управления
Гарантия возврата денег, если товар не подойдёт
Описание
2pcs 433MHz 4CH Car Key Fob Garage Door Opener Remote Control DuplicatorSpecification:Product size: 55*30*15mm/2.17*1.18*0.59inch Working frequency: 433MHzRemote control distance: 100m (in open environment)Working method: type copy Working voltage: DC 12V Working current: 14mA Working environment: -15℃~+75℃ Scope of application: suitable for electric door remote control, sliding door remote control, garage door remote control, motor remote control, curtain remote control, remote control cars and motorcycles, etc. Quantity: 2pcs, 3pcs (optional) Operation method: 1. Pairing codes (Learning) Place the original remote control and the copy remote control as close as possible, first press the button of the original remote control, and immediately after the indicator lights up, press and hold the remote control button to copy by yourself for about three seconds, the LED will flash 3 times and then flash quickly, it means the address code of the original remote control button has been successfully learned. Other keys are controlled in the same way for learning. Second, clear code Press the unlock button and the lock button at the same time for 2 seconds, the LED will flash 3 times. At this time, keep the lock button pressed and release the unlock button. Press the unlock button three or four times within 5 seconds and the indicator will flash quickly. The code has been cleared. Check if the existing remote control code has been successfully cleared: When you complete the clear action, you can press any button on the copy remote control. If the LED does not flash immediately at this time, it will flash after 2 seconds, which means the original code of the copied remote control has been completely deleted. If the LED still flashes quickly and immediately, the code still exists and needs to be cleared again. Third, recover the cleared code The copy remote control has a recovery function. If you accidentally clear the address code of the regular copy remote control during use, you can simultaneously press the start and mute buttons (NEXT two buttons) marked on the remote control. After about three seconds, the LED will flash 3 times. It starts flashing quickly, which means the cleared address code has been successfully restored. Precautions: 1. Before using, first clear the existing code of remote control duplicators out.2. It cannot copy rolling code remote controllers such as HCS301. Note: 1. Please allow slight dimension deviation due to manual measurement, different measurement methods and tools.2. Image may not reflect fa
Свойства товара
- Вес товара, г: 58
- Тип: Модуль расширения
- Для управления: дверьми, воротами
- Управление со смартфона: Нет
- Цвет: Черный
- Индикация: Цифровая
- Номинальный ток, А: 14
- Рабочее напряжение, В: 12
- Монтаж: Открытый
- Диапазон рабочих температур, °С: -15℃~75℃