Датчик движения ИК, UNIEL, USN-R50 60W/360R/E27 WHITE под лампу Е27. 7м, IP20. Белый.

Гарантия возврата денег, если товар не подойдёт

Описание Infrared motion sensor to turn on the light. Base E27, maximum power 60W. It is used as an adapter between the cartridge and the lamp and is designed to automatically turn on the lighting when motion is detected in the sensor coverage area. Motion detection distance up to 7m. It has adjustments for the duration of the lighting on time and the level of ambient light to trigger the detector. The E27 infrared motion sensor is designed to automatically turn on the lighting without using a switch. Such an application can be convenient in rooms where regular or frequent use of the switch is not very convenient. For example, on the stairs, in the garage, pantry, dressing room, workshop or. It may also be convenient to use the E27 sensor to turn on the lamp in the bathroom or toilet. Using an infrared sensor will also help save time spent on constantly turning the lighting on and off. The infrared sensor itself is an adapter between the E27 cartridge and the light bulb itself. The sensor of the device registers infrared radiation from objects, and, when motion is detected, closes the electrical circuit to turn on the lamp. The electric light switch itself must always be in the on position. The sensor is able to detect movement within a radius of 7 meters around (360 degrees). Turning on and off the lighting by the motion sensor of the light bulb occurs automatically. The duration of the time for switching on the lighting is regulated by the regulator on the body. The adjustment range is from 10 sec to 5 min. It is also possible to adjust the sensor sensitivity level depending on the ambient light level. In this way, you can turn off the sensor operation when other lighting is already on or in the daytime. The adjustment range is from 3 to 2000 lx. This E27 light bulb sensor can work with any lamps with an E27 socket: LED, incandescent, fluorescent. The wattage limit for lamps used with the product is 60W or less. Using a motion sensor to turn on the lamp will save time and energy. The sensor itself does not require additional power, and installing it is as simple as replacing a light bulb. This appliance can be useful in areas where a long presence is not required, such as a cellar, pantry, garage or dressing room. Also, turning the lighting on and off can be inconvenient in some rooms, such as long corridors and halls. It will be convenient to install a sensor for automatically turning on the lighting where the switch is located at a considerable distance from the entrance, and when installed in a bathroom or toilet, you can save yourself from looking for a switch at night. Install an infrared motion sensor for the E27 light bulb on the stairs, and you will no longer have to go down by touch at night. This device from Uniel infrared motion sensor USN-R50 is a convenient and practical solution for automatic

Свойства товара

Датчик движения ИК, UNIEL, USN-R50 60W/360R/E27 WHITE под лампу Е27. 7м, IP20. Белый.

Комментарии

Популярные объявления