Траверса пневматическая осевая тпо-250
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://besplatka.ua/aws/746x-/99/05/36/89/traversa-pnevmaticheskaya-osevaya-tpo-250-photo-cca6.jpg']
- url: https://besplatka.ua/ru/obyavlenie/traversa-pnevmaticheskaya-osevaya-tpo-250-acd59a
- City: Cherkasy
- Condition: New
- description: • max. load capacity: 2.5 t. • own weight: 47 kg. • stroke: 250 mm. • working air pressure: 4-6 atm. • min-max track width: 770-1070 mm. • axle distance: 450 mm. Traverse pneumatic axial TPO-250 is designed to lift and move in the transverse (in relation to the pit) direction of cars and commercial vehicles when performing work on adjusting the alignment angle, as well as when performing other work related to the repair and maintenance of the running gear of vehicles. the product can be installed on any four-post lift or on inspection ditches of appropriate dimensions and designs. The traverse is supplied by the manufacturer fully assembled. The traverse must be placed on the movable tracks and, if necessary, the track width must be adjusted, then tighten the safety screws. You can also adjust the clearance by moving the rollers up or down. Having installed the traverse in the required place (under the car), apply compressed air to the inlet valve (the other valve must be closed). After the traverse has raised the car to the required height, shut off the air supply with a cock, and insert the locking pin into the corresponding hole on the lifting rod. Lowering the car is done in reverse order.