Насос для перекачки бензина, керосина, дизельного топлива 100л/мин ex100 230в
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://besplatka.ua/aws/746x-/95/35/50/07/nasos-dlya-perekachki-benzina-kerosina-diztopliva-photo-be7f.png', 'https://besplatka .ua/aws/746x-/95/35/50/07/nasos-dlya-perekachki-benzina-kerosina-diztopliva-photo-f514.jpg', 'https://besplatka.ua/aws/746x-/95 /35/50/07/nasos-dlya-perekachki-benzina-kerosina-diztopliva-photo-0ac4.jpg', 'https://besplatka.ua/aws/746x-/95/35/50/07/nasos- dlya-perekachki-benzina-kerosina-diztopliva-photo-80c1.png', 'https://besplatka.ua/aws/746x-/95/35/50/07/nasos-dlya-perekachki-benzina-kerosina-diztopliva -photo-1b74.jpg']
- url: https://besplatka.ua/ru/obyavlenie/nasos-dlya-perekachki-benzina-kerosina-diztopliva-60c8a0
- City: Lutsk
- description: SpecificationsArticle F00390010Capacity (l/min) 100Voltage (V) 220Working medium: PetrolManufacturer: PiusiDimensions (mm) 240X400X350Weight (kg) 25Drive: electricSupply pressure (atm) 1.6In/out thread (inch) 1 1/4″ – 1″Country of production Italy The body of the pump part is made of durable cast iron, the rotor blades are made of polyacetal, which is wear-resistant in contact with metals. The design of the solution and the materials used can work with vapors of flammable substances, do not react. The design of the electric motor is separated from the pumping chamber, the penetration of fuel into the motor is excluded, even in case of violation of use or state of emergency, the cuffs will not corrode and will not push through. The shaft is steel, non-sparking. The chamber itself is cast iron, treated with a special polymer. The motor housing is sealed from dust and moisture, has wide radiator fins for heat dissipation when blown by the impeller. The motor control unit is placed in a vapor-tight housing, the switch is made with a special lever interrupter to avoid sparks that appear from a conventional switch. It is mounted directly to the network, after which it is isolated. Since the constant insertion of the plug in the vicinity of gasoline vapors can provoke an explosion. The presence of a built-in by-pass valve allows the pump to continue to operate when the flow is blocked or the gun is snapped off. The pump is supplied without cable. An anti-noise filter is installed on the pump. The Piusi EX100 F00390010 steel frame allows installation sideways, vertically and horizontally. Connects via flanges or threads: 1 1/4 inlet, 1 in. outlet. The EX series pump is built to ATEX explosion-proof certification. Degree of protection Ex dII T4 Gb Pump Ex 100 220V PIUSI self-priming, sliding (vane), explosion-proof for pumping gasoline, kerosene (including aviation), diesel fuel from containers. This is a new EX line pump suitable for pumping gasoline and diesel fuel with high performance and long duty cycle. It is easy to use, compact, versatile and adaptable to any work environment. Conforms to current principles of explosion prevention inside or outside the pump due to possible components that can sometimes cause ingress of liquid or the surrounding atmosphere. Conforms to all stringent requirements of the ATEX/IECEx directives relating to the use of equipment in potentially explosive areas. Does not demand preliminary filling of the case. Pump Ex 100 220V, used for refueling with gasoline, diesel fuel - yachts, boats, gasoline and diesel generators, cars, excavators, tractors and other equipment at construction sites and other remote places. Pumps can be permanently fixed on tanks or transported. Specifications and equipment: Rugged and compact design, cast iron housing; Highly efficient self-ventilated, single-phase motor with voltage - 220V; Built-in by-pass valve, thermal protection; Motor power - 1kW (1000W); Number of revolutions - 1450 rpm; Speed flow - 100l / min; Head - max 1.1 bar; Suction height - 2m (up to 4 meters with a check valve and hose diameter 1 "(25mm)); Inlet / outlet connection - 1¼" (32mm) / 1” ( 25mm) thread and flange; Operating temperature range - 20°C / +60°C; Dimensions - 400x350x240mm; Weight - 25kg; Warranty - 12 months Together with other models PIUSI EX80 and 140, the EX100 pump provides high and especially constant flow rates even when used in complex systems. The entire range characterized by a high flow rate that operates with a continuous duty cycle (except for EX80). There are two models with the same performance, differ in power and maximum current, as well as the number of revolutions of the rotorF00390010 - 1035 W, 4.5 Amperes, 1450 rpm The entire range features a high flow rate that operates with a continuous duty cycle (except for the EX80). There are two models with the same performance, differ in power and maximum current, as well as the number of revolutions of the rotorF00390010 - 1035 W, 4.5 Amperes, 1450 rpm The entire range features a high flow rate that operates with a continuous duty cycle (except for the EX80). There are two models with the same performance, differ in power and maximum current, as well as the number of revolutions of the rotorF00390010 - 1035 W, 4.5 Amperes, 1450 rpm