Пресс пневмогидравлический ппг-30
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://besplatka.ua/aws/746x-/99/03/08/92/press-pnevmogidravlicheskii-ppg-30-photo-155c.jpg', 'https://besplatka.ua/aws/746x-/99/03/08/92/press-pnevmogidravlicheskii-ppg-30-photo-758f.jpg']
- url: https://besplatka.ua/ru/obyavlenie/press-pnevmogidravlicheskii-ppg-30-9b1c71
- City: Cherkasy
- Condition: New
- description: • max. developed force of the press: 30000 kgf.• discreteness of the stroke of the support beams: 120 ± 1 mm. • stroke of the support beams in height: 750 mm. • max. sizes of processed details: - width: no more than 500 mm.; - height: no more than 700 mm. • overall dimensions of a press: - height: 1750 mm.; - width: 950 mm. The PPG-30 press belongs to UHL climatic products, category 4.2 according to GOST 15150-69 and must be operated indoors at an ambient temperature of plus 5°C to plus 35°C and relative humidity up to 80%. Maintenance: During maintenance of the press, it is necessary to check the level of hydraulic fluid in the pump reservoir, as well as the tightness of the threaded connections. MOT to be done once a month. When checking the level of hydraulic fluid in the reservoir, carefully remove the rubber plug from the filler neck (located on the front side of the reservoir at the top) with a screwdriver and check the fluid level. The filler neck is also the liquid level. Top up hydraulic oil if necessary. it is necessary to carefully remove the rubber plug from the filler neck with a screwdriver (located on the front side of the tank in the upper part) and check the liquid level. The filler neck is also the liquid level. Top up hydraulic oil if necessary. it is necessary to carefully remove the rubber plug from the filler neck with a screwdriver (located on the front side of the tank in the upper part) and check the liquid level. The filler neck is also the liquid level. Top up hydraulic oil if necessary.