Изготовление ресивера воздушного ресивера 0,5; 1,0; 1,6; 2,0; 3,2; 4,0; 6.3
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://besplatka.ua/aws/746x-/8/26/11/91/96bc63b5dfa6.png', 'https://besplatka.ua/aws/746x-/8/26/11/ 91/8006699c3c23.jpg', 'https://besplatka.ua/aws/746x-/8/26/11/91/613612eef7b2.jpg', 'https://besplatka.ua/aws/746x-/8/ 26/11/91/e92927bb67a1.jpg']
- url: https://besplatka.ua/ru/obyavlenie/izgotovlenie-vozduhosbornik-resiver-05--10--16--20--32--40--19ba1f
- City: Dnipro
- description: An air receiver is an air receiver that is used for technological needs in the form of a compressed air accumulator, to create its supply and evenly distribute pressure in the air ducts during compressor operation. Air collectors with nominal volumes: 0.5; 1.0; 1.6; 2.0; 3.2; 4.0; 6.3; 8.0; 10; 16; 20; 25; 32; 40; 50 m3 and working pressures: 0.8; 1.0; 1.6 MPa (8, 10, 16 kgf/cm2), designed to reduce pressure fluctuations in air ducts and to create an air reserve during the operation of stationary air compressors for general purpose and rotary compressors, as well as air compressors with discharge pressure up to 1.6 MPa (16 kgf / cm2). Air collectors, in agreement with the developer of technical specifications, can be used as receivers and vessels for storing nitrogen, argon and other inert gases. Air collectors are designed for operation in areas with seismicity less than 7 points on a twelve-point scale. m - subject to confirmation by calculation of strength from seismic impacts. Climatic design of air collectors: 1. When delivered to areas with a temperate and cold climate - UHL1 according to GOST 15150. 2. When delivered to areas with a tropical climate - T1 according to GOST 15150. Air collectors can be operated in the low-cycle loading mode - periodic rise and release of pressure. The low-cycle loading mode must be specified by the consumer enterprise when ordering an air collector.