Подъемник пневматический пп-1
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://besplatka.ua/aws/746x-/99/03/91/95/podemnik-pnevmaticheskii-pp-1-photo-0786.jpg', 'https://besplatka.ua/aws /746x-/99/03/91/95/podemnik-pnevmaticheskii-pp-1-photo-4a0c.jpg']
- url: https://besplatka.ua/ru/obyavlenie/podemnik-pnevmaticheskii-pp-1-92e7fd
- City: Cherkasy
- Condition: New
- description: • max. load capacity : 2500 kg. • max. admissible pressure: 2-6 atm. • empty weight: 430 kg. • length: 3990 mm. • width: 1993 mm. • folded height: 175 mm. • relative lifting height: 365 mm. Technical data and purpose. This type of lift belongs to pantograph or scissor lifts. Unlike hydraulic lifts, the platform is lifted by compressed air, which increases the speed of vehicle maintenance. The lift is designed for use in various service stations and tire shops. Using the platform, you can pull out the entire chassis of the car and service all the wheels of the car at the same time. Installing a platform at a tire shop allows, in the off-season, to carry out minor repairs to the running gear (replacement of ball bearings, steering tips, brake pads). The lift has a safety lock. In the raised state of the lift, it is necessary to set the stopper lever to the position of fixing the load. The lift is mounted on a concrete, asphalt or other prepared hard and even floor in the required place. On request, a higher or lower lifting height can be set.Maintenance. The maintenance of the lift consists in periodic checking of the tightening of the threaded connections, lubrication of the rubbing parts (for lubrication without disassembly, it is recommended to use technical oils, for example I20), it is also necessary to control the condition of the corrugated chambers. asphalt or other prepared hard and level floor in the required location. On request, a higher or lower lifting height can be set.Maintenance. The maintenance of the lift consists in periodic checking of the tightening of the threaded connections, lubrication of the rubbing parts (for lubrication without disassembly, it is recommended to use technical oils, for example I20), it is also necessary to control the condition of the corrugated chambers. asphalt or other prepared hard and level floor in the required location. On request, a higher or lower lifting height can be set.Maintenance. The maintenance of the lift consists in periodic checking of the tightening of the threaded connections, lubrication of the rubbing parts (for lubrication without disassembly, it is recommended to use technical oils, for example I20), it is also necessary to control the condition of the corrugated chambers.