Контроллер автоматического управления генератором datakom dkg-207
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://besplatka.ua/aws/746x-/97/62/66/52/datakom-dkg-207-kontroler-avtomatichnogo-upravlinnya-photo-dade.png', 'https://besplatka .ua/aws/746x-/97/62/66/52/datakom-dkg-207-kontroler-avtomatichnogo-upravlinnya-photo-c40b.jpg', 'https://besplatka.ua/aws/746x-/97 /62/66/52/datakom-dkg-207-kontroler-avtomatichnogo-upravlinnya-photo-0fb2.jpg', 'https://besplatka.ua/aws/746x-/97/62/66/52/datakom- dkg-207-controller-automatichnogo-upravlinnya-photo-de45.jpg']
- url: https://besplatka.ua/ru/obyavlenie/datakom-dkg-207-kontroler-avtomatichnogo-upravlinnya-c1f8b4
- City: Kyiv
- description: DKG-207 is a fully functional automatic gauge control (AMF) attachment for a single genset that is in recovery mode. In the AUTO mode, it controls the voltage of the phases of the grid and controls the automatic start-up, the start-up noise and the power supply of the generator set at different times of life in the grid, and the hour of operation of the generator controls the internal shutdown of the engine and external fault signals. In case of faulty faults, the attachment automatically vibrates the engine and signals about the causes with the help of red light indicators. DKG-207 provides the latest set of digital adjustment of timers, threshold levels, configuration of input and output signals, as well as operational sequences. All programs can be changed with the help of buttons on the front panel, and do not ignore the call block. The operation of the system can be controlled locally or remotely with the help of software utilities for PCs under Windows controls. Basic capabilities: - generator / generator inputs / generator control: 3/1 / single phase - current transformer input: 1 - automatic start and generator coil - possibility of programming an hour of non-stop operation (robot cycle / cleaning) - generator protection functions - possibility of remote start - programming analog inputs for temperature and pressure control - Motogym - Starting before periodic maintenance - Hour before periodic maintenance - Number of attempts to start - Number of remote starts - Number of starts from vanishing Technical characteristics: Generator voltage: 15-300 V (F - N) Generator frequency: 0-100 Hz. Merezha: max 300 V (F - N) Merezha frequency: 50/60 Hz. Power supply voltage: vіd 9.0 to 33.0 V Shutdown jet: 100 mA Shutdown jet with relay closed: max 300 mA Generator contactor relay output: 16 A / 250V Battery contactor relay output: 16 A / 250V Relay output: 10 A / 28V Charging generator strom : 54 mA at 12 V Analog input: 0-5000 ohm Serial port: logic-type, 2400 baud, no parity control, 1 stopbit Operating temperature: -20 °C to 70 °C storable temperature: -30 °C to 80 °C ° C