Цифровой будильник часы с подсветкой в виде цифр, белый
Гарантия возврата денег, если товар не подойдёт
Описание
The watch is mains powered and comes with a USB cable without an adapter. The battery is only needed to save the date and time settings in the event of a power outage.Material: ABSColour: whiteScreen type: LEDDisplay type: digital see Size of numbers - 8 cm Open the battery connector, remove the fuse and fix the battery in the compartment, screw the cap tightly. Connect the wire that comes with the kit to the clock (the connector is located on the back of the clock), connect the other end of the wire to a power source with a USB connector (for example, to a power adapter from 5 V / 500 mA to 1000 mA or a computer). When first turned on, the watch should display the numbers from 0 to 9 in turn and emit a characteristic beep. Once every 15 seconds, the watch will switch to the date display mode, then to the temperature display mode, then back to the time display mode. How to set the correct indicators (time and date): Hold the "SET" button on the watch for three seconds, after after which the number \"12\" starts flashing on the left dial, this means that the setting mode has been activated (If you do not press the buttons on the watch, then after 5 seconds the watch will automatically switch from setting mode to normal mode). The first setting mode is to select the time format (eg 1:04 or 13:04). To change the format: press the \"+\" or \"-\" button to the right of the \"SET\" button, each time you press the left dial, the numbers \"12\" and \"24\" will change in turn . After selecting the desired format, press \"SET\", this will switch the clock to the time setting mode. Use the \"+\" and \"-\" buttons to set the correct value in the left dial (hours), then press \"SET\" and set the correct value in the right dial (minutes). Press \"SET\" and set the correct indicators, for example 12/31 (on the left is the month, on the right is the day). Press \"SET\" and enter a valid year, for example 2021. Press \"SET\" and select whether the temperature will be displayed in Celsius C or Fahrenheit F. After pressing \"SET\", the watch will return to normal mode. How to change the watch mode: The watch has two modes of operation. To select one of the two modes: hold down the \"+\" button for three seconds, then press \"+\" again to select one of the modes. dP1 - the clock will display time, date, year and temperature. dP2 - the clock will only display the time. How to set the alarm: Press and hold the \"-\" button for three seconds. The left dial should flash, use the \"+\" and \"-\" buttons to set the desired value on the left dial (hours), then press \"SET\" and set the correct value in the right dial (minutes). After specifying the time at which the alarm should go off, press \"SET\" and specify the interval between the repetitions of the alarm, it can be specified from 5 to 60 minutes. Then press \"SET\". Now press n
Свойства товара
- Тип батареи: AAA
- Тип: Электронный будильник
- Тип индикации: Арабские цифры
- Бренд: GOODSTORAGE
- Цвет: Белый
- Особенности и функции будильника: Дата и календарь, Подсветка
- Подсветка: LED подсветка
- Материал корпуса: ABS пластик
- Питание от: сети 220
- Размеры, мм: 16x6x2,5 см