Роторная косилка "корабль" кр-02 под вом (для мотоблоков с пневмоподвеской)
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://images.ua.prom.st/1777454341_kosilka-rotornaya-ship.jpg']
- url: https://besplatka.ua/ru/obyavlenie/kosilka-rotornaya-ship-kr-02-pod-vom-dlya-motoblokov-s-3683fa
- City: Kyiv
- description: Rotary mower "SHIP" KR-02 under PTO (for motoblocks with air cooling) Mounted rotary mower "SHIP" for motoblocks with air-cooled engines, in which the power take-off shaft is located at the rear. shrubs up to 10 mm in diameter. It is aggregated to walk-behind tractors and functions with the help of a keyed PTO of a walk-behind tractor. When aggregating to a walk-behind tractor, the steering wheel (motor block) turns 180 degrees, work is done at rear speed. When operating a rotary mower, it is recommended to disassemble the corner joints every 12 hours of operation and lubricate the gears with grease (lithol, grease). This will extend the life of the device many times over. The design of the mower is adjustable - you can set the height of the grass cut using a special skid. In the process of mowing, you do not have to keep the mower on the weight - by setting the required cutting height, you simply support it along with the entire mass of the walk-behind tractor on the ground. The rotary mower has working bodies - two disks rotating towards each other, and 8 knives (4 pieces on each disk) freely rotating and fixed with a cotter pin. Under the action of centrifugal force, when the discs rotate, the knives straighten and work as cutting bodies. Then, be sure to turn off the clutch (hold down the left lower handle of the walk-behind tractor), start the engine and turn on the reverse speed, start mowing.