Пневматический культиватор 8 рядный коймак 1008 г
Гарантия возврата денег, если товар не подойдёт
Свойства товара
- img: ['https://images.ua.prom.st/1040677676_pnevmatichna-propashna-sivalka.jpg', 'https://images.ua.prom.st/1040677757_pnevmatichna-propashna-sivalka.jpg', 'https: //images.ua.prom.st/1040677775_pnevmatichna-propashna-sivalka.jpg', 'https://images.ua.prom.st/1040677828_pnevmatichna-propashna-sivalka.jpg', 'https://images.ua. prom.st/1040677837_pnevmatichna-propashna-sivalka.jpg', 'https://images.ua.prom.st/1040677860_pnevmatichna-propashna-sivalka.jpg']
- url: https://besplatka.ua/ru/obyavlenie/pnevmatichna-propashna-sivalka-8-ryad-koymak-1008-g-9fb5a9
- City: Kyiv
- description: Pneumatic precision seed drill 8 row Koymak 1008 GPneumatic precision seed drill type SPP is designed for precise sowing of row crops in a dotted way, one or two grains per nest at a given distance between the nests. Thanks to a wide range of sowing discs, the seeders can sow corn, sunflower, watermelons, cucumbers, melons, peas and other crops with seeds similar in shape and size, with a row spacing of 45-70 cm. The SPP/FS type seeders are equipped with a device for simultaneous, with seed sowing, application to the soil and mineral granular fertilizers. When the PTO is connected, the exhauster starts to move, thereby creating a vacuum pressure, which, by means of low-pressure hoses, creates a vacuum in the discharge chamber of the sowing unit. Thanks to the vacuum, the seeds that are in the feed chamber are attracted to the holes of the sowing discs. When the seeder moves, the discs are set in motion. Rotating, they move the seeds to the device for introducing them into the soil. The seed covered by the disc passes the adjustable seed stripper which removes excess grains, leaving only one or two grains at each hole in the seed disc. The number of revolutions of the power take-off shaft should not be higher - 540 rpm. 2. Simultaneously with the introduction of seeds into the soil, there is the possibility of applying mineral fertilizers through a device that allows you to adjust the rate of fertilizer application, depending on the amount needed per hectare and the type of fertilizer. 3. In order to increase the reliability of the transmission in the device for applying fertilizer and seeds to the soil, reinforced drive sprockets and chains were installed. To increase productivity and eliminate manual work during the sowing process, the markers were equipped with a hydraulic system, which made it possible to control the markers from the tractor cab5. Due to the independent operation of each section, the distance between the rows can be set at your discretion (the minimum distance between the sections is 45 cm). This is very convenient when sowing watermelons, melons and other crops that require fairly wide row spacing. Producer: Koymak Country: Turkey Characteristics: Number of rows processed simultaneously: