Усилитель мощности LEA Professional Connect 704D
Гарантия возврата денег, если товар не подойдёт
Описание
LEA Professional Connect 704D is a professional 4-channel installation power amplifier with DSP and network control and DANTE interface. The DANTE CONNECT series amplifiers are equipped with IoT technology and are ideal for small and medium installations. Leverage the power of the cloud to remotely manage, monitor, alert and more from any of your personal devices. Just plug the amplifier into the network and start managing your systems. With three connection methods, you can use the built-in Wi-Fi hotspot, connect to an existing Wi-Fi network, or use FAST Ethernet to connect to any LAN via Cat5 or Cat6 cable. The web browser-based user interface works on any device without downloading software. Direct LoZ and HiZ (70V or 100V) are selectable for each channel. The patented Smart Power Bridge allows the user to bridge a channel to achieve twice the power of that channel without sacrificing the amplifier channel. The amplifier has a 96kHz DSP with input signal routing, multiple 48dB/octave crossover filters, 8 parametric EQ filters, configurable speaker limiters and real-time load monitoring. The DANTE CONNECT series amplifiers also feature analog and DANTE inputs and external I/O control for remote on/off and fault monitoring. High efficiency class D output stage for low AC consumption. There is a universal switching power supply with PFC operating from 100VAC - 240VAC +/- 15%. Specifications: - Type: power amplifier - Category: 4-channel - Power: 700W @ 4/8/16 ohms and 70/100V, 350W @ 2 ohms - Analog inputs: balanced inputs with user selectable input sensitivity of 26dB and 34 dB (2 ch = 2 inputs, 4 ch = 4 inputs, 8 ch = 8 inputs) - Dante inputs: 8 x 8 Dante at 96 kHz or 48 kHz, multicast or unicast - AES 67 inputs: configurable via Dante software Controller - THD + N: 0.1% (20Hz to 20kHz) 2.5 dB at 20 kHz into 2 ohms - Signal to noise level: 105 dB (20 Hz to 20 kHz re. 8 ohms) - Crosstalk: 70 dB (20 Hz to 20 kHz) - Amplifier output classification: Class D with patented Smart Power Bridge technology allowing bridged output without sacrificing amplifier channel - DSP Architecture: Analog Devices Sigma 96kHz DSP with 32-bit core and sample rate converters - Input Matrix: Routed Matrix; any input to any output with primary and secondary input priority - Crossovers: IIR filters up to 48 dB per octave (Linkwitz Riley and Butterworth) - Parametric EQ: 8-band parametric EQ per channel - Output delay: 100 ms per channel - Output protection : Mains protection DC, high frequency
Свойства товара
- Тип: Усилитель мощности
- Бренд: LEA PROFESSIONAL